Strategic Communications and Marketing News Bureau

Study: Reducing energy required to convert CO2 waste into valuable resources

CHAMPAIGN, Ill. — Surplus industrial carbon dioxide creates an opportunity to convert waste into a valuable commodity. Excess CO2 can be a feedstock for chemicals typically derived from fossil fuels, but the process is energy-intensive and expensive. University of Illinois chemical engineers have assessed the technical and economic feasibility of a new electrolysis technology that uses a cheap biofuel byproduct to reduce the energy consumption of the waste-to-value process by 53 percent.

The new findings are published in the journal Nature Energy.

Conversion of CO2 to chemicals like ethylene for plastics is possible through a process called electrochemical reduction. Typically, a stream of CO2 gas and a fluid electrolyte move through an electrolysis cell that breaks the CO2 down into molecules like ethylene on the cathode, but it also produces oxygen from water on the anode, the researchers said.

“About 90 percent of the energy required in conventional CO2 reduction is used up by the oxygen-producing, anode side of an electrolysis cell,” said Paul Kenis, a chemical and biomolecular engineering professor, department chair and study co-author. “But there is no big market for the excess oxygen, so 90 percent of the energy is essentially wasted.”

Finding a feed material that reduces the energy to drive the anode reaction could be a strategy for radically reducing the energy requirements of CO2 conversion, according to a recent National Academies Report of which Kenis was a co-author.

The new study proposes glycerol – an organic byproduct of sugar cane biofuel production that requires less energy to oxidize – as an alternative to the energy-intensive oxygen-producing step.

To test if the new electrolysis technique has the potential to push the full CO2 conversion process to a carbon neutral or negative budget, the researchers examined the cost and energy consumption for the production cycle of the waste-to-value process. The four-step cycle includes the capture of industrial CO2 waste gas, the input of electricity, the new electrolysis reaction, and the separation and processing of the final chemical products.

“Our model uses the current electrical grid setup as the source of electricity to make the scenario more realistic,” Kenis said. “Being able to drive CO2 conversion with already-in-place infrastructure – and not relying on the hope of the future grid being powered by 100 percent renewables – while achieving carbon neutrality or negativity could be a holy grail scenario.”

The analysis includes best- and worst-case CO2 emissions and energy consumption scenarios and concludes that the prospects of CO2 reduction, in terms of CO2 emissions and economics, can drastically improve by looking beyond conventional anode reactions.

 “The glycerol-based electrolysis reaction shows a lot of promise. However, we will continue to explore other organic waste materials because even when production rises in the wake of increased biofuel production, it still will not be enough to fully support the need,” Kenis said. “The good news is that the chemistry involved is flexible and there are a lot of organic waste products that can do the job.”

Many researchers focus on improving the selectivity and activity of chemical catalysts for CO2 reduction reactions, and that work needs to continue, said Sumit Verma, a former chemical and biomolecular engineering graduate student and study co-author. “Looking beyond oxygen evolution at the anode seems like a win-win situation, as we not only reduce the processes’ energy consumption but also produce a second valuable product stream,” he said.

The International Institute for Carbon Neutral Energy Research; Japanese Ministry of Education, Culture, Sports, Science and Technology; Dow Chemical Company; and the Glenn E. and Barbara R. Ullyot graduate fellowship supported this research.

Editor’s notes:

To reach Paul Kenis, call 217-625-0523; kenis@illinois.edu.

The paper “Co-electrolysis of CO2 and glycerol as a pathway to carbon chemicals with improved technoeconomics due to low electricity consumption” is available online and from the U. of I. News Bureau. DOI: 10.1038/s41560-019-0374-6

Read Next

Announcements Marcelo Garcia, professor of civil and environmental engineering at The Grainger College of Engineering.

Illinois faculty member elected to National Academy of Engineering

Champaign, Ill. — Marcelo Garcia, a professor of civil and environmental engineering in The Grainger College of Engineering, has been elected to the National Academy of Engineering.

Social sciences Male and female student embracing on the quad with flowering redbud tree and the ACES library in the background. Photo by Michelle Hassel

Dating is not broken, but the trajectories of relationships have changed

CHAMPAIGN, Ill. — According to some popular culture writers and online posts by discouraged singles lamenting their inability to find romantic partners, dating is “broken,” fractured by the social isolation created by technology, pandemic lockdowns and potential partners’ unrealistic expectations. Yet two studies of college students conducted a decade apart found that their ideas about […]

Engineering Civil and Environmental Engineering Professor Nishant Garg, center, is joined by fellow researchers, from left: Yujia Min, Hossein Kabir, Nishant Garg, center, Chirayu Kothari and M. Farjad Iqbal, front right. In front are examples of clay samples dissolved at different concentrations in a NaOH solution. The team invented a new test that can predict the performance of cementitious materials in mere 5 minutes. This is in contrast to the standard ASTM tests, which take up to 28 days. This new advance enables real-time quality control at production plants of emerging, sustainable materials. Photo taken at the University of Illinois Urbana-Champaign on Monday, Feb. 3, 2025. (Photo by Fred Zwicky / University of Illinois Urbana-Champaign)

Researchers develop a five-minute quality test for sustainable cement industry materials

A new test developed at the University of Illinois Urbana-Champaign can predict the performance of a new type of cementitious construction material in five minutes — a significant improvement over the current industry standard method, which takes seven or more days to complete. This development is poised to advance the use of next-generation resources called supplementary cementitious materials — or SCMs — by speeding up the quality-check process before leaving the production floor.

Strategic Communications and Marketing News Bureau

507 E. Green St
MC-426
Champaign, IL 61820

Email: stratcom@illinois.edu

Phone (217) 333-5010